Are you planning on installing a commercial air conditioning system for your building?

Installation is easier than you might think, but there are certainly a few mistakes you should watch out for. So what are the main factors you need to keep in mind?

This article enumerates the eight most common mistakes during commercial air conditioning installation!

1. Ignoring Manufacturer Instructions

One of the worst things you can do when installing a commercial air conditioning system is not to follow the directions from the manufacturer. Instructions from the manufacturer give important information about the size and compatibility of the air conditioning system’s parts and the right way to set the order, size, and supply of the air conditioning system’s components.

Follow the directions from the manufacturer during installation to ensure your HVAC system is efficient, saves energy, and even last less long. You must closely watch every step of the installation process to ensure the manufacturer’s instructions are followed.

2. Inadequate Ventilation

Insufficient ventilation is one of the most common mistakes in business air conditioning installation. If the system doesn’t have enough airflow, moisture can build up inside, making it more likely to leak or cause other problems.

Poor airflow can also cause the system to work less well, leading to higher energy costs. Without enough airflow, the system won’t be able to cool a room well, making it work less efficiently and lowering the air quality inside. To avoid these problems, ensure the system is vented correctly, and the air screens are often changed.

3. Failing to Test for Leaks

An air conditioning system must be checked for leaks before installation to ensure it runs efficiently. Leaks can occur in cases where connections, tubing, and valves were poorly assembled or installed incorrectly.

If a leak is not detected, the system will need to be continually topped up with refrigerant, which is both costly and can cause damage to the environment. A certified technician or air conditioning engineer should use a variety of pressure tests to gauge the effectiveness of the air conditioning system before installation.

Failing to conduct these tests before installing an air conditioning system can be short-term and long-term detrimental.

4. Not Adhering to Building Codes

One of the most common mistakes businesses make when installing industrial air conditioning is that they need to follow building codes. Not following the proper procedures can cause problems in the future and could put the safety of the people at risk.

Building rules make sure that the installation process is done right and quickly and that it is safe. Commercial air conditioning installations should have a thorough legal and regulatory checks system to avoid making this mistake.

Before starting work, the installer should check the local zoning laws to make sure they are in line and talk to the local building inspector to get permission. It is essential to get the proper permits and make sure that any outside work on the land is done right.

5. Skimping on Insulation

Insulation helps keep noise from traveling, keeps temperatures more stable, and minimizes energy use. Without it, air conditioners can get noisy, and the temperature can change much more.

It can make people feel uncomfortable and even hurt their work and mood. Insulation also ensures the system works well and quickly, which can keep costs down.

Skimping on insulation can be very expensive in the long run, as it can lead to costly fixes and higher energy costs. It is essential to put in the right amount of insulation during installation.

6. Not Giving Your AC a Secure Attachment or Support

An improperly fitted AC unit can be dangerous, as it puts excessive stress on the unit and can be a source of injury or air conditioning malfunction. To ensure your AC unit is safely installed, make sure that you secure the appropriate supports and attachment points during installation.

Doing so will reduce the risk of structural weakness and damage to the unit and ensure it functions properly. To prevent significant errors, take the time to measure the space and make sure all necessary safety equipment is in place.

7. Choosing The Wrong-Sized Air Conditioner

If the load needs aren’t figured out correctly, the air conditioner might not fit the room. If that happens, it won’t be able to cool or heat the space as needed, which wastes energy and money. Load estimates can be wrong if the pipes are too long, the unit is in the wrong place, or the insulation needs to be corrected.

To ensure you get the right commercial air conditioner size in the right place, you must correctly estimate the load needs and install the suitable unit. When installing a business air conditioning unit, you should always talk to a professional technician to ensure all requirements are met, and the load estimates are correct.

8. Not Considering Thermostat Placement

The location of your thermostat has a direct effect on how comfortable your business is. If you put it in a place that gets a lot of direct sunlight, has a draft, is near gadgets, or is far from where most people spend their time, your system will have to work harder and cost you more money in energy bills.

The thermostats should be in the middle of the building, out of direct sunlight, and away from windows and doors that can cause drafts. Ideally, they should be near the most-used rooms.

Avoid Common Commercial Air Conditioning Installation Mistakes

Be mindful of all of these mistakes when it comes to commercial air conditioning installation. Take the time to plan and consult an experienced professional for reliable service to ensure your system is best set up for success. Contact a professional installer for personalized advice to ensure your commercial air conditioning system is installed correctly and safely.

Check out our other blog posts for more helpful tips.